Atco Royale B30 Manual Woodworkers
Institution of Linguists ARA -----Associate of the Royal Academy ATI -----Associate of the Textile Institute AEB -----Associated Examining Board AYZ -----Associated Youth for Zion AKQ -----Association des Kinotherapeutes du Quebec ASE -----Association for Science Education ASJ -----Association for Scientific Journals APF.
Contents • • • • • • • • • • • • • History [ ] Atco is the trade name of lawn mower of Atlas Chain Company, a company formed in 1865 which made chains for ships. Atco was founded by Charles H Pugh in 1921. • Pugh started making motor mowers under the tradename Atco (short for 'Atlas Chain Company'), with a 22 inch wide cut. The Atco motor mower was an immediate success. 900 of them were made in 1921, each costing £75. Within five years, annual production had accelerated to tens of thousands.
Prices were cut and a range of sizes was available, making the Standard the first truly mass-produced motor mower. • 5 November 1981: In the early hours a fire destroyed the old Charles H Pugh site and stock.
It closed and moved to in, where it reopened as Atco Ltd. • 1991: Atco Ltd was renamed as Atco-Qualcast Ltd. • 1995: Atco-Qualcast Ltd was acquired by and ran as Atco-Qualcast Ltd. • 2011: Bosch sold the intellectual drawings, plant, equipment and tooling for the entire existing mower range to the Allett Mowers division of Turfmech Machinery Limited. Allett commenced manufacturing the range of Atco mowers with Allett branding instead of Atco, and with new model names. • 2011: Bosch licensed the Atco brand name to Global Garden Products Italy S.p.A., who launched a new Atco branded range of lawnmowers.
Products (1980–1992) [ ] All the below products from 1980–1992 are now obsolete. Lawn & garden tractors [ ] Made in U.S.
(1980–85) [ ] From 1980, Atco Motor Mowers imported and made to their designs from the United States. Atco 8/32E lawn tractor, 1980 The full model range of American-built Atco lawn and garden tractors was: • 7/32 – 3-speed with reverse, 7 h.p engine, 32' cutter deck • 8/32E – 3-speed with reverse, 8 h.p engine, 32' cutter deck • 8/36E – 3-speed with reverse, 8 h.p engine, 36' cutter deck • 11/36E – 3-speed with reverse, 11 h.p engine, 36' cutter deck • 16/42E – 4-speed with reverse, 16 h.p engine, 42' cutter deck The 'E' at the end of model number for American tractors stands for electric start; the 7/32 never had electric start but did have. Made in Britain (1986–92) [ ] In 1986 Atco stopped production of the American lawn and garden tractors and started producing their own in, Suffolk, in the United Kingdom. The first new model was the 11/36, which won 'Best Grass Cutting Machine of The Year' in 1986. Atco 8/30 lawn tractor, 1988 The full model range of British Atco lawn and garden tractors was: • 6/30 – 3-speed with reverse, 6 h.p engine, 30' cutter deck • 8/30 – 3-speed with reverse, 8 h.p engine, 30' cutter deck • 8/36 – 5-speed with reverse, 8 h.p engine, 36' cutter deck • 11/36 – 5-speed with reverse, 11 h.p engine, 36' cutter deck • 12/36 – 5-speed with reverse, 12 h.p engine, 36' cutter deck The 8/30 and 8/36 lawn tractors were sold with an option of a powered grass collector, while the 12/36 was only sold with a powered grass collector. The Atco 6/30 was an economy model with pull start, no electrical equipment, and a solid mild steel bonnet front.
Carport Diagnose Lizenz Download Adobe there. Atco also made a trailer to fit all models, with a 10 cubic foot hopper which tipped for emptying. There was a choice of 30' or 36' cutting widths, both having twin blades.
'V' channelling in the deck ensured that grass cut by one blade was not thrown in the path of the other blade. Grass was ejected not from the side, as was common with other tractors, but from the rear. This meant that the non-collecting models could be hitched to a towed sweeper to collect grass cuttings, leaves and other debris. The tractors had 8 h.p., 11 h.p., or 12 h.p. The 7.25 pint fuel tank provided approximately 2 hours and 30 minutes of continuous mowing.
The tractors also featured wide pneumatic tyres. Atco was the first ride-on lawn tractor to have a powered grass sweeper, driven from a (PTO) at the rear of the machine.
The PTO worked independently of the blades, so the user could cut the lawn without collecting the clippings or vice versa. Atco 11/36 lawn tractor (1986), fully restored.
Rear of Atco lawn tractor Atco stopped making lawn tractors in 1992. When GGP Ltd bought the Atco name in 2011, they started producing new lawn tractors branded Atco. Lawn mowers [ ] Commodore – domestic petrol cylinder mower (1986–92) [ ] Available in four sizes of cut: 12', 14', 17' and 20'.
Models Numbers for the Atco Commodore were: • Commodore B12 – recoil start • Commodore B14 – recoil start • Commodore B17 – recoil start • Commodore B20 – recoil start • Commodore B14 – electric start • Commodore B17 – electric start • Commodore B20 – electric start Electric start models were available from April 1988. Ensign – domestic petrol cylinder mower (1990–92) [ ] The Ensign had a cushion-grip handlebar that could be adjusted to height and an adjustable comb which lifted flattened stems which might not otherwise be cut. Polished beechwood front rollers allowed mowing up to the lawn edge and could be replaced quickly with sidewheels for cutting long or wet grass. Fitted with the Atco 144cc engine, the Ensign was available in a choice of three cutting widths: 12', 14' and 17'. Key start was available on the 14' and 17' models. Imperial – domestic petrol cylinder mower (1990–92) [ ] Both front and rear rollers could be individually levelled to maintain alignment between the mower and the lawn.
As well as a comb for raising flattened grass, the Imperial had a scraper which prevented the buildup of grass on the steel front roller. A key-start engine was fitted. Royale – heavy-duty petrol cylinder mower (1964–2011) [ ] Top of Atco's cylinder mower range, the Royale was designed for large areas of fine lawn.
The traditional 6-bladed steel cutting cylinder gave 70 cuts per yard while the heavy duty rollers helped to produce a striped finish. Early models of the Royale featured a –built horizontal shaft engine with recoil start. Engines in later models were from, with an electric start option introduced during the 1980s. The Recommended Retail Price of the machine just before it was discontinued in 2011 was over £2000, making it the most expensive mower in the Atco range.
All three models – 20', 24' and 30' – were largely hand-built by a small team. Rotary mowers [ ] Atco in more recent years have been producing powered by either petrol or electricity.
Production of petrol-engined cylinder mowers continues with the 'Clipper' range, in three sizes. Download Free 2D Games For Psp Go Cso. References [ ].
Hi I am restoring a 1987 atco royal b30,I am now trying to connect the throttle cable mechanism under the carb to the vertical rod which goes from the end of the throttle cable to the top of the carb. There are two seperate rotating plates connected by a spring. Does anyone have a photo or diagram of how this is connected, I have hummed and harred about it for hours and cant work it out. It was connected when I got it and it worked,but on changing the tank to carb gasket it pulled apart. I know it is in an awkward position but would appreciate any help.
Thanks Paul Leslie. Hi, That's ok, from what I have seen I would think that your missing link is of Briggs and Stratton origin. I have looked at some of the parts lists available via the Atco parts finder and have not found anything that looks like the parts you are seeking. Hopefully someone will pop up here and give us a clue to resolve the problem.
Another alternative would be to seek the help of someone who has more experience of this model. There are a couple of links to companies to be found on this site if you look in the club information section. Good luck Ray.