This example requires the following SoftDevice: S212 Important: Before you run this example, make sure to. The scalable Encrypted Channels example shows how to set up and use up to 15 encrypted ANT channels on one board. The example consists of a Transmitter application and a Receiver application. Swarm Robotics Ppt Download For Windows more. Both applications use the module.

Important: Before you run this example, make sure to program the SoftDevice. The scalable Encrypted Channels example shows how to set up and use up to 15 encrypted. Learn how to open an.ENCRYPTED file or remove viruses that make.ENCRYPTED files. If there is any other file encryption program on your computer.

The Receiver application uses the module in addition. Transmitter The Transmitter application creates the defined number of master channels, configures the encryption settings, and encrypts the channels. The pattern of the LEDs indicates the number of open transmitting encrypted channels. Black Body Radiation Experiment Pdf Editor there.

For example, if four channels are transmitting, the LED pattern is 0100. You can find the source code and project file of the example in the following folder: examples ant ant_scalable_encrypted scalable_encrypted_tx Receiver The Receiver application creates the defined number of slave channels, configures the encryption settings, and starts tracking the respective master channels, which requires negotiating the encryption parameters. The pattern of the LEDs indicates the number of decrypted channels. For example, if four channels are tracking encrypted master channels, the LED pattern is 0100. You can find the source code and project file of the example in the following folder: examples ant ant_scalable_encrypted scalable_encrypted_rx Testing You can test the Encrypted Channels example in different ways: • • Testing the Transmitter with the Receiver • Compile and program the Transmitter application on one board. Observe that the LED pattern on the board indicates the number of encrypted transmitting channels. • Compile and program the Receiver application on another board.

Observe that the LED pattern on the board indicates the number of channels that have been decrypted. Testing the Transmitter using AntWare II • Compile and program the Transmitter application on a board. • Run AntWare II.

• Open the device panel and enable advanced burst. Set the encryption key • Configure all channels: • Set the channel assignment to slave. • Set the channel ID for each channel according to the following table: Parameter Value Device number Channel number + 1 Device type 2 Transmission type 1 • Set the radio frequency to 2476 MHz. • Use the default values for all other configuration parameters. • Open each channel to start transmission. • Observe that each channel is receiving garbage broadcast messages. • While each channel is open, enable encryption for the channel.

TECHNOSAT TECNOSAT T-888 FTA 1. Button &?6108? Through RCU (Remote Control Unit), activate patch. Then go to Menu Parental Lock Input Password?0000? Pay Channel Lock Status has to be?OFF' for the Scrambled Channels to work. Method to change the key codes: To view the Code Menu, go to Menu Information Code Edi t.

To update codes press?EXIT & 8088? Through RCU (Remote Control Unit). Multi-picture Option: Press?Blue? Button, Multi PIG with 9 pictures made available. =============================================== Patch activation -Technosat Bodyguard 555 Procedure To Activate & De-activate Patch Software Steps to activate the patch: Go to Menu Press Red, Green, Yellow and Blue color button. Lock Menu appears with Lock Status - Pay Channel Lock Status - 1. Always off 2.

Select Always off option for the emulation to be active even after the power chord is removed? Select Off option for the emulation to be active, but this becomes inactive once the power chord is removed? Select On option for the emulation to be inactive How to get Multi Picture Option? Please select sort button through remote to get this option Three options appear: 4 Channels 9 Channels 16 Channels Select appropriately.=============================================== Technosat T-1100 Plus FTA Receiver Procedure To Activate Patch Software On T-1100 Plus FTA Receiver Pre-Requist: 1.

The Software version should be greater or equal to 5.0. The last 4 digit of manufacturing serial no. Of the receiver should be above 6000. Note: Check the serial no.

Barcode on the back panel of the receiver. Steps to activate the patch: # There are basically two Methods to activate the Software patch? Goto Menu User Installation Parental Lock Current password Press?9911? From the RCU.

After pressing?9911?, you can see a RED color button on the bottom will appear. Which indicates the patch is enabled and can watch the scrambled channels.

Goto any one of the scrambled channels of ABsat, Multivision or Polsat. Just Press?9911? Keys from the RCU.

The patch is activated. Note: Once the patch is activated the emulation Software will keep working even after the receiver is switched?OFF? And turned?ON? The only way to deactivate the emulation Software is to bring receiver to Factory Default ============================================= Technosat 2000Ultra Activation of Emulation Go to Menu and type 5400, emulation is made active with the display of Code Edit Option in the Menu and vice versa for deactivation. To view the codes, press yellow button from the remote.

Universal Password: 6789 =============================================== TECHNOSAT 5200FTA Procedure To Activate Patch Software On T-1100 Plus FTA Receiver Pre-Requist: 1. The Software version should be greater or equal to 5.0. The last 4 digit of manufacturing serial no. Of the receiver should be above 6000. Note: Check the serial no. Barcode on the back panel of the receiver. Steps to activate the patch: # There are basically two Methods to activate the Software patch?

Goto Menu User Installation Parental Lock Current password Press?9911? From the RCU.

After pressing?9911?, you can see a RED color button on the bottom will appear. Which indicates the patch is enabled and can watch the scrambled channels. Goto any one of the scrambled channels of ABsat, Multivision or Polsat. Just Press?9911? Keys from the RCU. The patch is activated.

Note: Once the patch is activated the emulation Software will keep working even after the receiver is switched?OFF? And turned?ON? The only way to deactivate the emulation Software is to bring receiver to Factory Default =============================================== TECHNOSAT 6000Plus_PVR Procedure To Activate & De-activate Patch Software Steps to activate the patch: # There are basically two Methods to activate the Software patch? Goto Menu User Installation Parental Lock Current password Press?9911?

From the RCU. After pressing?9911?, you can see a RED color button on the bottom will appear. Which indicates the patch is enabled and can watch the scrambled channels.

Goto any one of the scrambled channels of ABsat, Multivision or Polsat. Wait till you see on?0000: Scrambled? Message on the right-top corner of the TV screen. Then, Press?9911?

Keys from the RCU. The patch is activated.

Note: Once the patch is activated the emulation Software will keep working even after the receiver is switched?OFF? And turned?ON?

Conditional Access System: If you need to watch channels using any original Smart Cards (Like Irdeto, Viaccess, Mediaguard, Nagravision, etc.) on the embedded slot you need to De-activate the emulation Software (patch) to allow the embedded slot to function correctly with the original Smart Card. Steps to de-activate the patch: # There are basically two Methods to de-activate the Software patch? Goto Menu User Installation Parental Lock Current password Press?9911? From the RCU.

After pressing?9911?, you can see a RED color button on the bottom will disappear. Which indicates the patch is disabled and you cannot watch the scrambled channels. Goto any one of the scrambled channels of ABsat, Multivision or Polsat. Then, Press?9911? Keys from the RCU. The patch is de-activated. Note: Once the patch is de-activated the emulation Software will not work even after the receiver is switched?OFF?